Ceramic Fluffing Knife

Ceramic Fluffing Knife is a component consisted in high-speed cigarette machines for fluffing tipping paper so that they can be glued better and thus connected better to the cigarette rod.

Material

A ceramic knife is a knife designed with a ceramic blade typically made from zirconium dioxide (ZrO2; also known as zirconia). These knife blades are usually produced through the dry-pressing and firing of powdered zirconia using solid-state sintering. It is 8.5 on the Mohs scale of mineral hardness, compared to 4.5 for normal steel and 7.5 to 8 for hardened steel and 10 for diamond. The resultant blade has a hard edge that stays sharper for longer when compared to conventional steel knives. Whilst the edge is harder than a steel knife, it is less tough and thus more brittle. The ceramic blade is sharpened by grinding the edges with a diamond-dust-coated grinding wheel.

Zirconium oxide

Zirconium oxide is used due to its polymorphism. It exists in three phases: monoclinic, tetragonal and cubic. Cooling to the monoclinic phase after sintering causes a large volume change, which often causes stress fractures in pure zirconia. Additives such as magnesia, calcia and yttria are used in the manufacture of the knife material to stabilize the high-temperature phases and minimize this volume change. The highest strength and toughness is produced by the addition of 3 mol% yttrium oxide yielding partially stabilized zirconia. This material consists of a mixture of tetragonal and cubic phases with a bending strength of nearly 1,200 MPa. Small cracks allow phase transformations to occur, which essentially close the cracks and prevent catastrophic failure, resulting in a relatively tough ceramic material, sometimes known as TTZ (transformation-toughened zirconia).

Sharpening And General Care

A diamond dust sharpener with cradle for a ceramic knife.

Unlike a traditional steel blade that benefits from regular honing and resharpening in order to keep a sharp edge, a ceramic knife will stay sharp and retain its cutting edge for much longer—up to 10x longer according to some tests. The inherent hardness of the ceramic material also makes it more difficult for the consumer to resharpen. Although a ceramic knife therefore does not need regular sharpening in the same way as steel, its blade edge will eventually degrade or chip and lose its cutting edge, at which point specialized sharpening services are required for the ceramic edge.

Features:

Ceramic

Low honing requirement

Acid-resistance

Surface strengthened

Hardened

Rust-proof

Anti rust

Anti corrosion

Corrosion proof

Hard and tough

High performance

Brand new

Long functional life

Reliable

High temperature tolerance

High fracture strength

Stainless

non-magnetic

Non-conducting

COMPANY PROFILE

HK UPPERBOND INDUSTRIAL LIMITED, an innovative company that specializes in manufacturing and distribution of tobacco machinery and spare parts, as well as providing top-notch technical services to tobacco industry.

Our comprehensive range of products includes Heat-Not-Burn equipment, cigarette production equipment,filter rod maker, tobacco primary line, and shisha equipment. Each product is meticulously crafted to meet the requirements and standards of the tobacco industry.

Furthermore, we understand that the tobacco industry is ever-evolving, and we are ready to adapt to the changing landscape.

Our knowledgeable team stays informed about the latest industry trends to provide our customers with cutting-edge solutions that meet their specific needs and requirements.
 

Since established in 2007, our primary focus has been to continuously work towards becoming a reliable and preferred supplier by maximizing customer satisfaction. By consistently delivering high-quality products and exceptional services, we have earned the trust of our valued clients from Europe, America, Middle East, Africa,Southeast Asia.

Our mission:
Committed to technology and service innovation, create great value for customers
 

Our vision:
To be the most reliable partner in the industry

Strength Factory

We provide spare parts for cigarette making and packing machines, including Protos, Molins Super 9, MK95, MK8, MK8D, Passim, GD X2, HLP, Sasib, Focke

Exhibition

CUSTOMERS

CERTIFICATES